D-XTR-DY-A-24勉強資料、D-XTR-DY-A-24日本語版試験解答

一般的には、IT技術会社ではEMC D-XTR-DY-A-24資格認定を持つ職員の給料は持たない職員の給料に比べ、15％より高いです。これなので、IT技術職員としてのあなたはFast2testのEMC D-XTR-DY-A-24問題集デモを参考し、試験の準備に速く行動しましょう。我々社はあなたがEMC D-XTR-DY-A-24試験に一発的に合格するために、最新版の備考資料を提供します。

EMC D-XTR-DY-A-24 認定試験の出題範囲：

トピック	出題範囲
トピック 1	XtremIO X1 and X2 Installation: For storage implementation specialists and system integrators, this domain covers required documentation for installations, including document usage order, cabling requirements for single and multi-cluster setups, logical order of installation operations post-cabling, up to cluster format, and post-installation procedures and processes.
トピック 2	XtremIO X1 and X2 Management: In this section of the exam, for storage system managers and administrators, this section of the exam covers storage management operations using GUI, CLI, and REST, including user accounts and access methods.
トピック 3	XtremIO X1 and X2 Solution Integration: For solution architects and integration specialists, this domain covers recoverPoint, VPLEX, and AppSync options, considerations, limitations, and use cases
トピック 4	Oracle and VDI deployment challenges, best practices, and considerations in XtremIO environments.

>> D-XTR-DY-A-24勉強資料 <<

EMC Dell XtremIO Deploy Achievement 認定 D-XTR-DY-A-24 試験問題 (Q57-Q62):

質問 # 57
Which configuration options are available in the XtremIO X2 WebUl cluster security settings?

A. SNMP Heartbeat, ODX Mode, and Encryption
B. LDAP, Login Banner, and Inactivity Timeout
C. Start Cluster, Stop Cluster, and Power-off
D. Event Handlers, User Administration, and VAAI TP Limit

正解：B

解説：
The XtremIO X2 WebUI provides various cluster security settings configurations. These include LDAP (Lightweight Directory Access Protocol) for authentication, Login Banner for security notices, and Inactivity Timeout to log out idle sessions automatically, ensuring the security of the management interface. References
:= Dell Deployment Services

質問 # 58
A systems administrator upgraded a Microsoft Windows 2003 server to Windows Server 2008. The administrator noticed that performance is less than expected. Investigation has shown that the partitions on the XtremlO volumes are misaligned.
Which step(s) should be taken to align the data?

A. Backup the data, run diskpart, recreate the partition, restore the data
B. Backup the data, run fdisk, recreate the partition, restore the data
C. Use Mbralign to move the partition
D. Use Disk Management to move the partition

正解：A

解説：
To align the partitions on XtremIO volumes after an upgrade from Windows Server 2003 to Windows Server
2008, the following steps should be taken:
* Backup the Data: First, ensure that all data on the existing misaligned partitions is backed up to a secure location to prevent any data loss.
* Run Diskpart: Use the Diskpart utility, which is a command-line tool in Windows, to delete the existing partitions and create new aligned partitions. Diskpart allows for more control over the alignment process compared to graphical tools.
* Recreate the Partition: After deleting the misaligned partitions, create new partitions using Diskpart with the correct alignment settings as per the XtremIO best practices.
* Restore the Data: Once the new partitions are created and properly aligned, restore the data from the backup to the newly aligned partitions.
This process ensures that the partitions are aligned correctly, which can significantly improve performance due to more efficient disk access patterns1. It's important to follow the detailed procedures outlined in the official Dell XtremIO Deploy Achievement documentation to ensure proper alignment and to avoid any potential issues during the process.

質問 # 59
How should the log bundle be retrieved after a failed XtremlO cluster creation?

A. Use the XMS and select the "Collect Log Bundle" option
B. No option is available to collect logs in the event of a cluster creation failure
C. Connect to SC-X1 through the TECH port
D. Run the create-debug-info debug-info-name=initial setup command

正解：A

解説：
To retrieve the log bundle after a failed XtremIO cluster creation, you should use the XtremIO Management Server (XMS) and select the "Collect Log Bundle" option. Here are the steps to follow:
Access XMS: Log into the XMS using the appropriate credentials.
Navigate to the Option: Find and select the "Collect Log Bundle" option within the XMS interface.
Initiate Collection: Start the log bundle collection process. This may involve confirming the action and specifying any particular settings or filters for the log collection.
Monitor Progress: Wait for the log bundle collection to complete. The duration may vary depending on the size of the logs and the performance of the system.
Retrieve Log Bundle: Once the collection is complete, download or access the log bundle from the specified location within the XMS interface.
Use for Troubleshooting: Use the collected logs for troubleshooting the cluster creation failure or provide them to Dell EMC support for further analysis1.
It's important to follow the official Dell XtremIO Deploy Achievement documentation for the most accurate and up-to-date procedures related to log collection and troubleshooting.

質問 # 60
What is a specific configuration guideline that should be followed when configuring Linux hosts to support XtremIO storage?

A. Assign LUN 0 to the boot LUN
B. Enable the I/O elevator
C. Set the LUN queue depth to 64
D. Set the execution throttle to 35025

正解：C

解説：
When configuring Linux hosts to support XtremIO storage, it is recommended to set the LUN queue depth to
64. This setting helps to optimize the performance of the host when communicating with the XtremIO storage system.
* Access Host Configuration: Log into the Linux host that will be connected to the XtremIO storage.
* Modify HBA Parameters: Locate the HBA (Host Bus Adapter) parameters within the host's configuration files.
* Set Queue Depth: Adjust the queue depth parameter for the HBA to 64. This can typically be done by editing the options.conf file or similar, depending on the HBA driver in use.
* Apply Changes: Save the changes and reload the HBA driver or reboot the host to apply the new configuration.
* Verify Configuration: Confirm that the new queue depth setting is active and functioning as expected.

質問 # 61

When an XtremIO X2 array is delivered, where is the cable shown in the exhibit connected?

A. Middle USB in X3-SC1 only
B. Bottom USB in X3-SC1 and X3-SC2
C. Bottom USB in X3-SC1 only
D. Middle USB in X3-SC1 and X3-SC2

正解：D

解説：
When an XtremIO X2 array is delivered, the cable shown in the exhibit should be connected to the middle USB ports in both X3-SC1 and X3-SC2. This is based on the standard configuration and setup for XtremIO X2 arrays as per the Dell XtremIO Deploy Achievement document. The middle USB ports are typically used for specific functions such as connecting to a management network or interfacing with other devices that are part of the storage array infrastructure.
The process for connecting the cable is as follows:
* Identify the Correct Ports: Locate the middle USB ports on both X3-SC1 and X3-SC2. These ports are usually marked and differentiated from other USB ports by their position or labeling.
* Connect the Cable: Insert the USB connector end of the cable into the middle USB port on X3-SC1 and then connect the other end to the corresponding port on X3-SC2. Ensure that the connection is secure and that the cable is not obstructing any other components or airflow.
* Verify the Connection: Once connected, verify that the cable is recognized by the system. This can typically be done through the XtremIO Management Server (XMS) interface or by checking the system's hardware configuration.
* Check for Functionality: Ensure that the connected cable functions as intended. This may involve transferring data or accessing the management network, depending on the specific use case for the cable.
* Reference Official Documentation: For detailed instructions and best practices, always refer to the official Dell XtremIO Deploy Achievement document1. This document provides comprehensive guidance on all aspects of setting up and managing XtremIO X2 arrays, including cable connections.
By following these steps and referring to the official documentation, you can ensure that the cable is connected correctly and that the XtremIO X2 array is set up for optimal performance and management.

質問 # 62
......

今の社会はますます激しく変化しているから、私たちはいつまでも危機意識を強化します。キャンパース内のIT知識を学ぶ学生なり、IT職人なり、D-XTR-DY-A-24試験資格認証証明書を取得して、社会需要に応じて自分の能力を高めます。我々社は最高のEMC　D-XTR-DY-A-24試験問題集を開発し提供して、一番なさービスを与えて努力しています。業界で有名なEMC　D-XTR-DY-A-24問題集販売会社として、購入意向があると、我々の商品を選んでくださいませんか。

D-XTR-DY-A-24日本語版試験解答: https://jp.fast2test.com/D-XTR-DY-A-24-premium-file.html

Mike Taylor Mike Taylor

Tiểu sử

D-XTR-DY-A-24勉強資料、D-XTR-DY-A-24日本語版試験解答

EMC D-XTR-DY-A-24 認定試験の出題範囲：

最新-便利なD-XTR-DY-A-24勉強資料試験-試験の準備方法D-XTR-DY-A-24日本語版試験解答

EMC Dell XtremIO Deploy Achievement 認定 D-XTR-DY-A-24 試験問題 (Q57-Q62):